Engineering Solutions
We provide turn-key engineering solutions to help your part design be manufacturable, moldable, and cost-effective, which keeps your product value-added ahead. Hamsan Mold Engineering Team are always ready to listen to your requirement and work with you to make your ideas into reality.
Reverse Engineering
● Complete data creation based on the samples or 2D part drawing;
● Experienced metrology technicians analyze and build accurate 3D digital models.
● CMM Capabilities
● SLA Prototypes provided to verify the 3D drawing
● Experienced metrology technicians analyze and build accurate 3D digital models.
● CMM Capabilities
● SLA Prototypes provided to verify the 3D drawing
Design Engineering
● Experienced mold engineers with developing efficient solutions to meet and exceed your standards and expectations.
● Upfront program feasibility, problem-solving, and unique solutions for prototype and production molds and part design.
● Mold flow and cooling analysis incorporated into mold designs.
● DFM Report on the part features in detail.
● Upfront program feasibility, problem-solving, and unique solutions for prototype and production molds and part design.
● Mold flow and cooling analysis incorporated into mold designs.
● DFM Report on the part features in detail.
Advanced Feasibility
● Dedicated engineering team committed to up-front design.
● Involved designers ensure our customer's best practices are communicated.
● Our engineers collaborate with our customers to manage the part design, reducing overall program timing and tooling cost.
● Recommend the right mould configuration based on the customer’s part drawings and annual
● Involved designers ensure our customer's best practices are communicated.
● Our engineers collaborate with our customers to manage the part design, reducing overall program timing and tooling cost.
● Recommend the right mould configuration based on the customer’s part drawings and annual
Moldflow Analysis Services
● CAE Services is a Certified Moldflow™ analysis expert.
● On-site Expert Certified staff is available to complete Flow, Pack, Cooling & Warpage analysis.
● On-site Expert Certified staff is available to complete Flow, Pack, Cooling & Warpage analysis.
Project Management
Good Communication is the key to making the project successful, Our Project team with strong technical and language background are always ready to listen to you and work with you from engineering to engineering. Standard and consistent communication with customers, offering innovative solutions to keep our customers ahead of their competition.
● Early Stage Engineering Support
● Quality Requirement Planning
● Material Selection Consultation
● Mold Concept Planning
● Design for manufacturability Services
● Mold flow analysis Services
● Product Testing Services
● Material Testing and Validation Services
● Quality Requirement Planning
● Material Selection Consultation
● Mold Concept Planning
● Design for manufacturability Services
● Mold flow analysis Services
● Product Testing Services
● Material Testing and Validation Services
● Product Development Services
● Product Design Assistance
● Professional Engineering Services
● Projects Schedule Planning
● Tooling Weekly Process Report
● Mold Tryout and Validation
● Mold Checking On-Site
● Shipment Arrangement and handling
● Product Design Assistance
● Professional Engineering Services
● Projects Schedule Planning
● Tooling Weekly Process Report
● Mold Tryout and Validation
● Mold Checking On-Site
● Shipment Arrangement and handling
Mold Manufacturing
Good Communication is the key to making the project successful, Our Project team with strong technical and language background are always ready to listen to you and work with you from engineering to engineering. Standard and consistent communication with customers, offering innovative solutions to keep our customers ahead of their competition.
● Multi-Cavities Mold up to 32&64 cavities
● Appropriate hot runner design and selection.
● Low cycle molds (5000 shots)
● High cycle molds (over 10 million)
● Multi-Material molding (2k) and insert molding
● Gas Assist Molds
● Foam Injection technique
● Appropriate hot runner design and selection.
● Low cycle molds (5000 shots)
● High cycle molds (over 10 million)
● Multi-Material molding (2k) and insert molding
● Gas Assist Molds
● Foam Injection technique
● High Precision Machining
● Over-Mold and Elastomeric
● Compression molding
● In-Mold Labeling
● Thin wall molding
● Thermoset Mold
● Hi-Temperature Molds
● Over-Mold and Elastomeric
● Compression molding
● In-Mold Labeling
● Thin wall molding
● Thermoset Mold
● Hi-Temperature Molds
Quality Assurance
To provide quality plastic injection molding products consistently and cost-effectively, every employee at HST Mold plays a key role. This quality system is successful because each team member follows controlled procedures, work instructions, visual standards, and quality plans to produce plastic injection molded parts that will meet or exceed the expectations of the customer.
To ensure that every step we take is a step forward, we based our Quality Management System (QMS) on stringent International Organization for Standardization (ISO) guidelines. Blending our deep manufacturing knowledge and experience with independent experts ensures the strongest foundation for the future, for our clients and ourselves.
To ensure that every step we take is a step forward, we based our Quality Management System (QMS) on stringent International Organization for Standardization (ISO) guidelines. Blending our deep manufacturing knowledge and experience with independent experts ensures the strongest foundation for the future, for our clients and ourselves.
● ISO 9001: 2008 Certified
● IQC - Incoming Material Quality Control
● IPQC - In-progress Quality Control
● IQC - Steel Hardness Checking
● FAI - First Article Quality Control
● QA - Molding Samples Inspection and QC Report
● FQC - Mould Final Quality Control
● IQC - Incoming Material Quality Control
● IPQC - In-progress Quality Control
● IQC - Steel Hardness Checking
● FAI - First Article Quality Control
● QA - Molding Samples Inspection and QC Report
● FQC - Mould Final Quality Control
Injection Molding Operations
HST Mold is a full-service plastic injection molding manufacturer, With our experience in tooling and molding, We can assure excellent quality of molded parts using technical expertise. we provide consistent high-quality plastic components to customers in a timely manner and never compromise on quality.
● On-site Injection Plastic Mold Repair & Maintenance.
● Injection Machines ranging from 90 T to 700Ton.
● 24-hour plastic molding manufacturing shifts.
● Long and Short Plastic Injection Molding Production Runs.
● Decouple Molding Process to qualify molds to maximize tool and part performance reducing operating costs and. maximizing profits.
● Good knowledge of processing engineering material and super engineering material.
● Higher yield and lower material consumption.
● Optimized process and cycle times.
● Consistent repeatability and part quality for every set-up and part run.
● Reliable process documentation.
● Injection Machines ranging from 90 T to 700Ton.
● 24-hour plastic molding manufacturing shifts.
● Long and Short Plastic Injection Molding Production Runs.
● Decouple Molding Process to qualify molds to maximize tool and part performance reducing operating costs and. maximizing profits.
● Good knowledge of processing engineering material and super engineering material.
● Higher yield and lower material consumption.
● Optimized process and cycle times.
● Consistent repeatability and part quality for every set-up and part run.
● Reliable process documentation.
